Laboratory & Research Facility Flooring
Chemical-resistant epoxy floors for scientific excellence
Engineered for Scientific Precision
Laboratory floors experience concentrated acid spills at pH 0.5 from hydrochloric and sulfuric acids. Organic solvents including dichloromethane, toluene, and acetonitrile contact surfaces daily. Mercury spills require decontamination protocols without floor degradation. Temperature fluctuations range from -80°C ultra-freezer zones to 250°C autoclave areas. ISO 15189 mandates cleanable, hygienic flooring systems for accredited testing facilities.
Chemical-resistant epoxy novolac achieves 95% cross-link density for maximum solvent resistance. Surface roughness measures 0.2-0.4μm Ra preventing reagent pooling. Mercury vapor permeability tests show <0.001 mg/m²/day transmission. Thermal shock testing confirms zero delamination after 500 cycles between -40°C and +120°C. Static dissipative formulations at 10⁶-10⁸ ohms prevent electronic interference in analytical equipment zones. Installation protocols follow COSHH regulations with full risk assessments.
Chemical Immunity
98% sulfuric acid exposure for 72 hours shows zero mass loss. Methylene chloride immersion causes <0.5% swelling.
Seamless Surface
Monolithic application eliminates 3mm grout lines that harbor 10⁵ CFU/ml bacterial loads in traditional tiled laboratories.
ESD Protection
Carbon fiber mesh achieves 10⁴-10⁸ ohms for mass spectrometry and electron microscopy areas per IEC 61340-5-1.
Easy Decontamination
Sodium hypochlorite at 10,000 ppm achieves 6-log reduction of bacterial spores. Surface withstands autoclave condensate at 134°C.
Slip Resistance
Pendulum test value exceeds 36 wet with glycerol contamination. Ramp testing confirms R11 rating at 10° incline.
Color Coding
RAL color matching delineates BSL-2 from BSL-3 zones. Yellow striping at 100mm width marks chemical storage boundaries.
Protect Your Research Investment
Specialist flooring for laboratories and research facilities
Get Free QuoteView Some of Our Previous Work
Frequently Asked Questions
How long does the installation process take?
Installation times vary based on floor size and condition. Most projects take 2-5 days, including preparation, application, and curing time. We'll provide a detailed timeline during your consultation.
What is the lifespan of epoxy flooring?
With proper maintenance, our epoxy flooring systems last 15-20 years in commercial settings. We offer comprehensive warranties and maintenance guidance to ensure maximum longevity.
Can epoxy flooring be installed over existing floors?
Yes, epoxy can be applied over most existing concrete floors after proper preparation. We'll assess your current flooring during the consultation to determine the best approach.
How much does epoxy flooring cost per square metre?
Costs typically range from £11-15 per m², depending on the system chosen, floor condition, and project size. We provide detailed quotes after assessing your specific requirements.. Contact us for a precise quote based on your specific requirements
Is epoxy flooring suitable for outdoor use?
While epoxy works best indoors, we offer UV-stable systems for covered outdoor areas. For fully exposed outdoor spaces, we recommend our polyurethane or MMA resin systems.