Pharmaceutical Grade Flooring
GMP-compliant epoxy systems for clean room environments
Meeting the Highest Standards
GMP Annex 1 mandates surfaces with less than 0.5μm Ra roughness in Grade A/B zones. Particle generation must remain below ISO 14644-1 Class 5 limits during normal operations. Floors endure daily sanitization with 6% hydrogen peroxide and quarterly fumigation with vaporized peracetic acid. Static charge accumulation cannot exceed 10⁸ ohms to prevent API powder adhesion.
Our pharmaceutical systems achieve 0.3μm Ra surface finish through diamond polishing. Particle shedding tests confirm <3.5 particles/m³ at 0.5μm size under foot traffic. Chemical resistant flooring verified against 70% IPA, 5% sodium hypochlorite, and phenolic disinfectants per USP <1072> protocols. ESD flooring maintains 10⁴-10⁷ ohms resistance throughout 10-year service life. Installation validation packages include surface roughness profiles, outgassing tests to ISO 14644-8, and microbial resistance certification.
GMP Compliant
Systems validated to EU GMP Annex 1, FDA 21 CFR Part 211, and ICH Q7 standards with full IQ/OQ documentation.
Zero Contamination
Surface porosity below 0.01% prevents biofilm formation. Seamless installation eliminates 10⁶ CFU/cm² bacterial harboring points found in joints.
Chemical Resistant
Resists concentrated acids pH 2-3, alkalis pH 12-13, methanol, acetone, and chlorine dioxide fumigation at 500ppm.
ESD Options
Conductive flooring maintains 10⁴-10⁶ ohms per ANSI/ESD S20.20. Prevents powder adhesion and equipment damage.
Coved Skirting
100mm radius coves meet FDA cleanability requirements. Monolithic floor-to-wall transition prevents moisture ingress.
Validation Support
IQ/OQ/PQ protocols, material certificates, and particle count data provided. MHRA and FDA audit-ready documentation.
View Some of Our Previous Work
Frequently Asked Questions
How long does the installation process take?
Installation times vary based on floor size and condition. Most projects take 2-5 days, including preparation, application, and curing time. We'll provide a detailed timeline during your consultation.
What is the lifespan of epoxy flooring?
With proper maintenance, our epoxy flooring systems last 15-20 years in commercial settings. We offer comprehensive warranties and maintenance guidance to ensure maximum longevity.
Can epoxy flooring be installed over existing floors?
Yes, epoxy can be applied over most existing concrete floors after proper preparation. We'll assess your current flooring during the consultation to determine the best approach.
How much does epoxy flooring cost per square metre?
Costs typically range from £11-15 per m², depending on the system chosen, floor condition, and project size. We provide detailed quotes after assessing your specific requirements.. Contact us for a precise quote based on your specific requirements
Is epoxy flooring suitable for outdoor use?
While epoxy works best indoors, we offer UV-stable systems for covered outdoor areas. For fully exposed outdoor spaces, we recommend our polyurethane or MMA resin systems.